Apuntes

RECOVERY PASSWORD ROOT JUNIPER EX Solution To recover the root password: Power off your switch by unplugging the power cord or turning off the power at the wall switch. Insert one end of the Ethernet cable into the serial port on the management device and connect the other end to the console port on the back of the switch. On the management device, start your asynchronous terminal emulation application (such as Microsoft Windows Hyperterminal) and select the appropriate COM port to use (for example, COM1). Configure the port settings as follows: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None Power on your switch by plugging in the power cord or turning on the power atthe wall switch. When the following prompt appears, press the Spacebar to access the switch's bootstrap loader command prompt: Hit [Enter] to boot immediately, or space bar for command prompt. Booting [kernel] in 1 second... At the following prompt,...